Brake Services in Riverside, CA
The braking system is one of a car’s most underrated or appreciated parts. When you suddenly need to slam on the brakes in traffic, you are counting on your brakes to do the job they are supposed to.
Most folks understand how their vehicle’s brakes work and are likely familiar with brake pads. However, the brake system is a complicated and precise mechanism that most people need to comprehend fully. Learning how a vehicle’s brakes work and what to look for in terms of performance is a critical step toward becoming a more knowledgeable and safe driver.
Read this blog to get an idea about how brake service is performed.
Different kinds of Brakes
Typically, disc brakes include a brake rotor linked directly to the wheel. The master cylinder’s hydraulic pressure causes a caliper (which holds the brake pads just outside the rotor) to squeeze the brake pads on either side of the rotor. The friction between the pads and the rotor slows and stops the vehicle.
Drum brakes are comprised of a brake drum that is attached to the inside of the wheel. When you press the brake pedal, hydraulic pressure pushes two brake shoes against the brake drum. This causes friction and slows or stops the vehicle.
Emergency brakes, also referred to as parking brakes, are a secondary braking system that operates independently of the service brakes.
While there are numerous emergency brakes (a stick lever between the driver and passenger, a third pedal, a push button or handle near the steering column, etc.), almost all emergency brakes are backed by cables that relate mechanical pressure to the wheels.
Most modern models have anti-lock braking systems (ABS). If the static brakes are suddenly applied, ABS prevents the wheels from locking up, preventing the tires from skidding. This characteristic is handy, especially when driving on wet and slick roads.
Key factors that your car brakes need service or replacement
Brakes are a vital part of any moving object; the ability to control what speed you are traveling at is critical and cannot be overlooked. So, if you have an old car, keep an eye out for these signs of failing brakes. Here are some warning signs:
Dashboard brake warning light
A regular hint that something is wrong with the brakes. The main reason for this light to show up is either in low brake fluid pressure or worn-out brake pads. The brake light indicates that the car requires immediate attention to determine the source of the problem, and you should take it to a repair shop as soon as possible for a brake inspection.
Car pulling to one side while braking
It could mean several things if you realize the car is pulling to one side while braking. You either have low tire pressure, a worn-out brake pad, or one of the brake calipers is stuck.
If checking the pressure in your car tires does not solve the problem, you should consult a mechanic. If the car pulls to one side even when not braking, it means one of the brake calipers is permanently stuck and needs to be repaired before causing further damage.
Rush to Protrans & get your brakes repaired in Riverside!
If you are looking for the best service for your braking system in Riverside, look no further than Protrans. We specialize in automobile repair and maintenance. Our excellent services include Diesel Engine Repair, AC Repair, Car & Truck Care, Electronic Services, Engine & Transmission, Alignment Heating and Cooling Services, and Brakes.